Sony Cyber-shot DSC-P1, Service Manual

Page: 76 / 105

5-19
7. Light Level Adjustment
Adjust the standard LV value.
Mode STILL
Subject Clear chart
(Color reproduction adjustment
frame with the zoom lens at WIDE
end)
Measurement Point Displayed data of page: 1 (Note 2)
Measuring Instrument Adjusting remote commander
Adjustment Page F
Adjustment Address 26, 28
Specified Value AE level 1: 0FE0 to 1020
Note 1: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON
Note 2:
The right four digits of the page: 1 displayed data of the
adjusting remote commander.
1:XX:XX
Displayed data
Adjusting method:
Order Page Address Data Procedure
1 0 01 01
2 5 F1 FF
3 D 63 40 Press PAUSE button.
Perform “Data setting during
4 camera system adjustment”.
(Refer to page 5-13)
5 6 01 0D Press PAUSE button. (Note 3)
6 6 02
Check the data changes to
“01”.
7 0 03 06
Check that the displayed data
8 1 (Note 2) satisfies the AE level
1 specified value.
Note 3: The adjustment data will be automatically input to page:
F, address: 26 and 28.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 0 03 00
2 6 01 00 Press PAUSE button.
3 5 F1 00
4 D 63 00 Press PAUSE button.
Release the data setting
5 performed at step 4.
(Refer to page 5-13)
6 0 01 00
8. Auto White Balance Standard Data Input
Adjust the white balance standard data at 3200K.
Mode STILL
Subject Clear chart
(Color reproduction adjustment
frame)
Adjustment Page F
Adjustment Address 3A to 3D, 59
Note 1: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Note 2: Refer to “Picture Frame Setting” for XH, XL, YH and
YL.
Adjusting method:
Order Page Address Data Procedure
1 0 01 01
2 5 F1 FF
3 D 63 40 Press PAUSE button.
Perform “Data setting during
4 camera system adjustment”.
(Refer to page 5-13)
5 6 90 00
6 6 91 04
7 6 92 00
8 6 93 30
9 6 6C 01
10 6 2C 01
11 6 01 79 Press PAUSE button.
12 Wait for 3 seconds.
13 6 01 11 Press PAUSE button.
14 6 01 0B Press PAUSE button. (Note 3)
15 6 02
Check the data changes to
“01”.
16 6 90 XL (Note 2)
17 6 91 XH (Note 2)
18 6 92 YL (Note 2)
19 6 93 YH (Note 2)
20 6 6C 01
21 6 2C 01
22 6 01 79 Press PAUSE button.
23 Wait for 3 seconds
Note 3: The adjustment data will be automatically input to page:
F, address: 3A to 3D and 59.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 01 00 Press PAUSE button.
2 6 6C 00
3 6 2C 00
4 5 F1 00
5 D 63 00 Press PAUSE button.
Release the data setting
6 performed at step 4.
(Refer to page 5-13)
7 0 01 00
8
Perform “Auto White
Balance Adjustment”.