Sony CineAlta HDCAM HDW-F900R, Maintenance Manual, Page: 66 / 546

1-56
HDW-F900R/V1 (E)
1-20. Filter Knob Position Adjustment
n
Procedure of the filter knob position adjustment is different
depending on the type of the incorporated filter.
1. Move the mount lever in the direction of the arrow and
remove the mount cap.
n
Be very careful not to touch the filter surface when the
mount cap is removed.
2. Rotate the knob shaft (thick) until the filter of the
thinnest color is visible from the front.
3. Align the file (CC) knob number “B” with the mark on
the inside panel assembly and attach it with the use of
the two stop screws (A).
4. Rotate the knob shaft (thin) until the filter of the
thinnest color is visible from the front.
5. Align the file (ND) knob number “1” with the mark on
the inside panel assembly and attach it with the use of
the two stop screws (B).
n
Standard tightening torque :
WP2
x
3 : 20 to 25
x
10
-2
N.m (2 to 2.5 kgf.cm)
WP3
x
3 : 53
x
10
-2
N.m (5.3 kgf.cm)
Mount cap
Mount
lever
1
2
Stop screws (B)
WP2 x 3
Stop screws (B)
WP2
x 3
Stop screw (A)
WP2
x 3
Stop screw
(A) WP2
x 3
Filter (CC) knob
Filter (ND)
knob
Filter (ND) knob Inside panel assembly
Knob shaft (thin)
Knob shaft (thick)
1
Mark
B