Sony CineAlta HDCAM HDW-F900R, Maintenance Manual, Page: 250 / 546

6-18
HDW-F900R/V1 (E)
6-9. Fan Replacement
n
This unit has the two DC fans.
6-9-1. Replacing the Fan on the Inside Panel
Assembly
1. Open the inside panel assembly.
(Refer to Section 1-5.)
2. Disconnect the harness from the connector (CN206)
on the FP-152 board.
3. Remove the four screws and remove the fan bracket.
Then remove the D.C. fan.
4. Install the new D.C. fan by reversing the steps of
removal.
m
.
When installing the D.C. fan, plate the D.C. fan in
the direction as shown in Fig. 1.
.
When installing the fan bracket, plate the fan bracket
in the direction as shown in Fig. 2.
Fig.1 : Direction of the D.C. fan when viewed from the
direction of arrow A.
Fig.2 : Direction of the D.C. fan when viewed from the
direction of arrow B.
D.C. fan
Inside panel assembly
Fan bracket
Step small
screws
FP-152 board
(CN206)
B
(See Fig.2)
A
(See Fig.1)
SEPA
Fan bracket
Low
Frame
High