Sony CineAlta HDCAM HDW-F900R, Maintenance Manual, Page: 533 / 546

11-33
HDW-F900R/V1 (E)
A16 : A/D GAIN
Adjusts gain of the A/D converter that is used to A/D convert the
playback RF signal automatically.
1.
Select “A16 : A/D GAIN” on the RF ADJUST MENU display
and press the rotary encoder.
RF ADJUST MENU
A16:A/D GAIN
PUSH RE TO ADJUST
CH RSLT CH RSLT
A B
C D
E F
G H
ALL
RF ADJUST MENU
A16:A/D GAIN
PUSH RE TO ADJUST
CH VR CH VR
A XX B XX
C XX D XX
E XX F XX
G XX H XX
ALL
RF ADJUST MENU
A16:A/D GAIN
NOW ADJUSTING...
CH RSLT CH RSLT
A OK B OK
C OK D OK
E F
G H
ALL
RF ADJUST MENU
A16:A/D GAIN
AUTO ADJUST COMPLETE
RETURN TO A1F TO SAVE
CH RSLT CH RSLT
A OK B OK
C OK D OK
E OK F OK
G OK H OK
ALL OK
RF ADJUST MENU
A16:A/D GAIN
INCOMPLETE
CH RSLT CH RSLT
A OK B NG
C OK D OK
E OK F OK
G OK H OK
ALL NG
When the STOP button is pressed at this timing, the adjustment
data as of this timing is displayed.
(XX is the 1-byte data.)
1 1
1 1
1
To adjust all channels
1. Insert the alignment tape (HR5-1A : Part No. 8-960-076-01).
2. Select ALL and press the rotary encoder.
3. The adjustment starts.
If the alignment tape is not inserted, the message “INSERT HR5-
1A” appears and the cassette lid opens. When the alignment tape
is inserted, “WAITING ...” appears and then the adjustment starts.
n
If the message “WAITING ...” keeps appearing even though the
automatic adjustment is started, the un-recorded segment might
have been played back. In such a case, change the playback
position of the alignment tape.
4. The adjustment results of all channels are displayed. When STOP
is pressed, data as of this timing is displayed.
When the adjustment ends normally :
OK is displayed in all channels and in the ALL
column. When the adjustment fails :
NG is displayed in the channel in which an error
occurs and in the ALL column.
n
When the message “INCOMPLETE” is displayed in
both cases of
1
and
2
, refer to the item “If the
message “INCOMPLETE” is displayed” in Section
11-3-5.