Sony CineAlta HDCAM HDW-F900R, Maintenance Manual, Page: 154 / 546

4-38
HDW-F900R/V1 (E)
LEVEL ADJ Display (Adjusting output signal level)
Item Setting Function
Y LEVEL ( _ 99 to 99) Adjust the Y signal output level.
SYNC LEVEL ( _ 99 to 99) Adjust the sync signal output level.
Pr LEVEL (
_
99 to 99) Adjust the Pr signal output level.
Pb LEVEL ( _ 99 to 99) Adjust the Pb signal output level.
OUTPUT SELECT Y/R/G/B/RGB
*
Selects the video signal that is output from the TEST
OUT and the VBS/SDI OUT terminal. (Invalid when
the BARS signal is selected.)
(The Y-signal becomes the VBS signal when VBS is
selected in the SD REAR BNC OUT of the OUTPUT
SEL display (of the OPERATION menu) and SD is
selected in the TEST OUT SELECT.) The output
signal returns to the Y-signal without fail at power-on.
* : RGB can be selected only when the Camcorder is used in the service mode.
SD LEVEL ADJ Display (Adjusting the down converter (SD OUT) output level) * * * * * 1
(Require an optional HKDW-702/902R.)
Item Setting Function
SD VBS LEVEL ( _ 99 to 99) Adjusts the VBS signal output level. * 2
SD VBS SETUP LVL 0%/7.5% Selects the setup level.
* 2
0% : Normal
7.5% : When an additional setup is required.
* 1 : Displayed only when the HKDW-702/902R is installed.
* 2 : If the format is set to 24PsF/23.98PsF when the HKDW-702 is installed or 24PsF when the HKDW-902R is installed, the setting is
displayed as “ _ _ ”.
? 03 O LEVEL ADJ
Y LEVEL : 0
SYNC LEVEL : 0
Pr LEVEL : 0
Pb LEVEL : 0
OUTPUT SELECT : Y
? 04
O
SD LEVEL ADJ
SD VBS LEVEL : 0
SD VBS SETUP LVL: 0%