Sony CineAlta HDCAM HDW-F900R, Maintenance Manual, Page: 246 / 546

6-14
HDW-F900R/V1 (E)
6-7-5. Removing the SW-1309 Board and the
AXM-33 Board
1. Remove the two screws (M2 x 4), and remove the
SW-1309 board and the SW bracket.
2. Disconnect the harness from the connector (CN1) on
the SW-1309 board.
3. Remove the two screws (PSW2 x 5), and remove the
SW-1309 board from the SW bracket.
4. Remove the one screw (PSW2
x
5) and remove the
CNB bracket.
5. Remove the six precision screws (P2.6 x 5), and
remove the AXM-33 board in the direction of arrow B.
n
When removing the AXM-33 board, push down the
PUSH levers of the two AUDIO IN connectors
simultaneously in the direction of arrow A, and
remove the board in the direction of arrow B.
6-7-4. Removing the RM-201 Board
1. Disconnect the harness from the connector (CN1) on
the RM-201 board.
2. Remove the two precision screws, and remove the
RM-201 board.
n
When attaching the AXM-33 board to the connector box,
push down the PUSH levers of the two AUDIO IN connec-
tors simultaneously, and pass it through the hole of the
connector box.
PUSH lever
AXM-33 board
AXM-33 board
CN1
SW-1309 board,
SW bracket
Connector box
AUDIO IN connector
Fig. 1
Fig. 2
PSW2 x 5
PSW2 x 5
Precision screws
P2.6
x 5
M2 x 4
Side view
CNB bracket
A
B
B
SW bracket
SW-1309
board
PUSH lever
Tweezers
AXM-33 board
Connector box
Hole
RM-201
board
CN1
Precision screws
P2.6
x 5