Sony CineAlta HDCAM HDW-F900R, Maintenance Manual, Page: 476 / 546

9-24
HDW-F900R/V1 (E)
9-24. V. Detail Black Clip Adjustment
Note
Perform this adjustment as needed by the customer.
Preparation
. OUTPUT/DCC switch (inside panel)
→
CAM/ON
. Shoot the gray scale chart to fill the entire screen of the
under-scanned picture frame.
Equipment :
HD digital waveform monitor
Measurement point : HD SDI connector (rear panel)
Adjustment point :
1 lens iris
Specifications : Open the lens iris by 1 F-stop
from the reference iris position
(A = 700
±
14 mV).
.
Select a horizontal scanning line in the bottom of the
white area in the center of the waveform monitor using
the LINE SELECT function.
Adjustment Procedure
Equipment : HD digital waveform monitor
Measurement point : HD SDI connector (rear panel)
1. Complete the adjustment as shown below by using the
setup menu.
MENU :
PAINT
PAGE : 09
*
DETAIL2
ITEM : DETAIL V-BLK LIMIT
(Default setting when shipped from
the factory: 0)
Specifications : Adjust the amplitude of the B portion
for the customer’s preference.
B