manualshive.com logo in svg

Sony CineAlta HDCAM HDW-F900R, Maintenance Manual, Page: 221 / 546

Share
Download
Sony CineAlta HDCAM HDW-F900R Maintenance Manual Download Page 221

5-9

HDW-F900R/V1 (E)

USER

USER layer

PRESET layer

SERVICE layer

PAINT

OPERATION

MAINTE

NANCE

FILE

MENU

CUSTOMIZE

Data structure

Category

ALL FILE LOAD

Memory Stick

? 03

O

ALL FILE

  

 ALL FILE LOAD   :  EXEC

 ALL FILE SAVE   :  EXEC

 F.ID :

 ALL PRESET      :  EXEC

 STORE ALL PRESET:  EXEC

 CLEAR ALL PRESET:  EXEC

 3SEC CLR PRESET :   OFF

 P00 ALL LOAD      ESC

   MEMORY STICK ACCESS

 DISPLAY MODE     :  ALL

 

 001.          00/000/00

 002.          00/000/00

 003.          00/000/00

 004.          00/000/00

 005.NO FILE

How to Read the Saved File from a Memory Stick

n

The ALL FILE LOAD reads the standard setup and saves in the main unit. If it reads the ALL file that
contains the modified standard setup data, the standard setup will be modified.

1.

Insert a Memory Stick.

2.

Set the MENU ON/OFF switch to the ON position.

3.

Let the ALL FILE display of the FILE menu appear on the screen and press the rotary encoder.

4.

Select ALL FILE LOAD and press the rotary encoder.

5.

When the cursor is moved to the file selection display, select the desired file that you want to read
and press the rotary encoder.

6.

Confirm that the screen returns to the ALL FILE display and the message [COMPLETE!] appears
indicating that the reading is complete.

Summary of Contents for CineAlta HDCAM HDW-F900R



































































































































































































































































































































































































































































































































































Reviews:

No comments