2-11
FVS-1000 MMP1
2-3. Location of Main Parts
Number
Sensor
Function
1
Front internal lock SW
The power is turned on by closing the front door.
2
S side tension regulator potential meter
This meter detects the rotation angle of the S side tension
regulator arm.
3
S tension regulator position sensor
This sensor detects load and unload position of S tension
regulator.
4
S side reel A/B winding SW
This switches A/B winding at the S side reel.
5
Lens emergency
This detects the lens position.
(Photo-diode)
6
Gate (retainer) discrimination SW
This switch discriminates between 16 mm and 35 mm of
the gate.
7
S side PAD roller position sensor
This sensor detects load and unload position of the S side
PAD roller.
8
S side PT roller position sensor
This sensor detects load and unload position of the S side
PT roller.
9
A side PAD TYPE SW
This switch discriminates between 16 mm and 35 mm of
the S side PAD roller and detects whether the S side PAD
roller is installed or not.
!/
Electrostatic sensor
This sensor detects the film (perforations) position.
!-
Gate TYPE SW
This switch discriminates between 16 mm and 35 mm of
the gate and detects whether the gate is installed or not.
!=
Slide adaptor detection SW
This switch detects the slide adaptor.
![
Mirror
!]
Gate position sensor
This sensor detects the load and unload position of the
gate (retainer).
!\
T side tension regulator potential meter
This meter detects the rotation angle of the T side tension
regulator arm.
!;
T side tension regulator position sensor
This sensor detects the load and unload position of the T
side tension regulator.
!'
T side reel A/B winding SW
This switches A/B winding at the T side reel.
!,
Lens emergency (LED)
This detects the lens position.
Rear side
#/
@.
#-
