background image

i

UMAXMirage IIse

Color Scanner

Operation Manual

Thank you for purchasing the color scanner. 

With this  color scanner, you can easily scan A3

size documents and photographs into your computer and maintain them as electronic copies.

Main

 

Features

:

!

 

High Resolution and Density Range: With a resolution of up to 9800 dpi, it produces better gamma
transformation, and a more accurate detection of highlight and shadow details, thereby allowing
even distribution of colors.

!

 

High Scanning Speed, Low Acoustic Noise: The scanner's micro stepping technology greatly increases
scanning speed and at the same time reduces noise level.

!

 

Intelligent Scanning Control Interface called MagicScan: MagicScan provides a comprehensive range of
scanning control functions. Completing the package are the bundled award-winning and proven
software packages such as buniscan PhotoPerfect.

!

 

Transparency Adapter: Allows the scanning of films, slides and transparencies up to the full-size
scanning area: 11.4” x 17”.

!

 

Proprietary Image Noise Reduction: Your scanner uses a sealed optical system design that blocks dust
particles and excess reflections from penetrating the optical unit, thereby overcoming image and
optical noise and ensuring sharp, true-life images.

System Requirements

: 486DX or higher (68030 processor or Power Macintosh for Mac users),

CD-ROM drive, hard drive with 20MB free disk space, 4MB memory, Microsoft Windows 3.1 or 95
(Mac OS 7.0 or later for Mac users), Windows-compatible keyboard, display and mouse. Recommended:
SVGA or higher graphics card.

Part No.: 830490-01

0597

Summary of Contents for MIRAGE IISE































Reviews: