v
d)
Plug the UTA (multi-pin D-SUB) end of the cable from the transparency adapter
into the UTA connector port on the back of your scanner.
3. Unlock your Scanner and UTA
Before using your scanner ensure that the carriage locks of UTA and scanner are in
the unlock position. Likewise, turn both the carriage locks of UTA and scanner to
the locked position, to avoid damaging the optics during transportation.
4. Connect the Interface Card (for PC users only)
a)
Turn off your computer and remove the computer
’
s housing cover.
b)
Locate an available 16-bit slot.
c)
Insert the SCSI card by pressing it gently but firmly into the slot. Make sure it is
firmly seated in the slot.
Carriage Lock for UTA:
Insert a coin into the
screwhead to either unlock
,
or lock
the transparency
Carriage Lock for Scanner:
Pull and turn this carriage lock
to either lock
,
or unlock
the scanner main body.
