1-4
FVS-1000 MMP1
1-6. Power Supply and Air Supply Specifications
w
Prepare the interior wiring which is near the FVS-1000 and easy to connect with the connectors of the
FVS-1000.
Power supply voltage
For UC
: AC 120 V
+
5 %
, 50/60 Hz
±
0.5 %
_
10 %
For CE
: AC 220 - 240 V
±
10 %, 50/60 Hz
±
0.5 %
Taking the above specifications into consideration, execute the electric supply construction for breaker etc.
Air supply specifications
Pressure
: 0.25 to 0.7 Mpa (2.5 to 7.1 kgf/cm
2
)
Flux
: 25 Nl/min or more
Relative humidity : 80 % or less
Others
: Water, oil and dust should not be included. (Max. 40
µ
m)
To supply the outside air from the pipe arrangement for supplying the high-pressure air, check the
pressure, flux and quality of the air, then satisfy the above specifications using a regulator or filter, and
then connect. When there is no pipe arrangement, to supply the stable air, it is recommended to use the
oil free compressor equipped with a tank.
n
.
If the air of which the pressure is more than the above specified value is supplied directly, there is a
danger of damaging the equipments.
.
If the air which includes the water, oil or dust is supplied, there is a possibility of causing an internal
damage. Be sure to supply the clean air which passed through the air drier and the mist filter.
.
As for the equipment to supply the outside air, refer to the operation manual of it. Be sure to apply the
periodic maintenance (draining the water from the tank etc.).
1-6. Power Supply and Air Supply Specifications
