3-8
DNW-7/90/90WS
Viewfinder screen (Factory default setting)
Description
* LEVEL 3 *
MASTER BLACK
: 0
........... Sets the black level.
MASTER GAMMA
: 0
........... Sets the gamma correction curve.
KNEE POINT 1
: 0
........... Used for the manual knee adjustment. Sets the knee point and slope.
KNEE SLOPE 1
: 0
KNEE POINT 2
: 0
........... Used for the manual knee adjustment. Sets the knee point and slope.
KNEE SLOPE 2
: 0
KNEE SELECT
: 1
........... Sets the knee patterns KNEE1/KNEE2/OFF. The knee correction is forcibly
canceled regardless of DCC ON/OFF setting when this item is set to OFF.
Sets the knee correction set by KNEE POINT 1/KNEE SLOPE 1 setting when
this item is set to 1.
WHITE CLIP
: ON
........... The white clip is forcibly canceled when this item is set to OFF.
Used for the video system adjustment.
WHT CLIP LEV.
: 0
........... Sets the white clip level.
* LEVEL 4 *
BURST LEVEL
: 0
........... Used for the chroma adjustment of the encoder.
BURST PHASE
: 0
........... Used for the chroma adjustment of the encoder. (for PAL only)
R-Y
: ON
........... Sets whether to add the R-Y signal to the encoder circuit.
B-Y
: ON
........... Sets whether to add the signal to the encoder circuit.
R-Y LEVEL
: 0
........... Used for the R-Y adjustment of the encoder.
*
1
B-Y LEVEL
: 0
........... Used for the B-Y adjustment of the encoder.
*
1
n
The setting of the “CHROMA” item on the “FUNCTION 1/2” page has priority
over the ON/OFF setting of the “R-Y” and “B-Y” items. When the CHROMA is
set to ON, it automatically returns to ON by turning the power switch to ON/OFF
even if the R-Y or B-Y item is to OFF. This item does not returns to ON when
the “CHROMA” item is set to OFF.
* LEVEL 5 *
RGB LEVEL
: 0
........... Sets the R/G/B video level.
*
1
RGB SYNC LEV.
: 0
........... Sets the R/G/B sync level.
RGB SETUP LEV.
: 0
........... Sets the R/G/B setup level.
ENC Y LEVEL
: 0
........... Sets the encoder output Y level.
*
1
ENC SYNC LEV.
: 0
........... Sets the encoder output sync level.
ENC SETUP LEV.
: 0
........... Sets the encoder output setup level.
*
1 : This level can be set in the 4:3/16:9 mode separately using DNW-90WS/90WSP.
3-1. Setup Menu
