3-10
DNW-7/90/90WS
Viewfinder screen (Factory default setting)
Description
* LEVEL 9 *
H PHASE
: –37 (PAL : –32)
........... Sets the H phase of the camera in the external genlock mode.
SC PHASE
: 0
........... Sets the SC phase of the camera in the external genlock mode.
SC 0/180 SELECT
: 0
........... Inverts the SC phase of the camera in the external genlock mode. (Selects
either 0 or 180 degrees.)
SC-H
: 0
........... Sets the INT SC phase reference level.
IRIS SET
: 0
........... Sets the auto iris reference level.
IRIS MODE
: 0
........... Sets the auto iris control level.
........... The more this set value increase, it approaches the average. The less this set
value decreases, it approaches the peak. Monitor the level bar at the upper
right on the viewfinder screen for this setting item to check that it approaches
the peak level or average level. The “P” indication on the left of the level bar
means the peak level. The “A” indication on the right of the level bar means the
average level.
IRIS WEIGHT
: 0
........... Sets the valid range of the auto iris. (The larger number make the valid range
narrower.)
IRIS SPEED
: 0
........... Sets the auto iris response speed.
CLIP HIGH LIGHT
: OFF
........... Limits the auto iris detection to 100% for the subject of high brightness (video
level: 100% or more)
* W-SHAD._G *
H SAW
: 0
H PARA
: 0
V SAW
: 0
........... Sets the manual white shading correction amount of G signal.
V PARA
: 0
H SAW (EXT)
: 0
H PARA (EXT)
: 0
V SAW (EXT)
: 0
........... Sets the manual white shading correction amount of G signal during the
extender mode.
V PARA (EXT)
: 0
SHAD COMP
: ON
........... Sets whether to activate the shading correction on G signal.
TEST OUT
: ENC
........... Sets the type of the video signal output from the TEST OUT connector.
n
Same as TEST OUT item of the “FUNCTION 1/2” page.
3-1. Setup Menu
