3-3
DNW-7/90/90WS
Pages configuration of the SETUP menu
Viewfinder screen (Factory default setting)
Description
*** MARKER 1/2 ***
SAFETY ZONE
: ON
........... Sets the safety zone marker display to ON or OFF.
SAFETY AREA
: 90 %
........... Sets the safety zone area to 80 %, 90 % or 100 %.
CENTER
: ON
........... Sets the center marker display to ON to OFF.
CENTER H
........... Moves the center marker horizontally.
CENTER V
........... Moves the center marker vertically.
*** MARKER 2/2 ***
BOX CURSOR
: OFF
........... Sets the box cursor display to ON or OFF.
*
1
BOX WIDTH
........... Changes the width of the box cursor.
BOX HEIGHT
........... Changes the height of the box cursor.
BOX H
........... Moves the box cursor horizontally.
BOX V
........... Moves the box cursor vertically.
** VF DISPLAY 1/2 **
DISP MODE
: 3
........... Set whether to display the items partially or to display no item. (1/2/3)
........... For details, refer to the Operation Manual.
EXTENDER
: ON
........... Sets the extender display to ON or OFF.
ZOOM
: ON
........... Sets the zoom position display to ON or OFF.
** VF DISPLAY 2/2 **
FILTER
: ON
........... Sets the filter display to ON or OFF.
WHITE
: ON
........... Sets the white balance display to ON or OFF.
GAIN
: ON
........... Sets the gain selection value display to ON or OFF.
SHUTTER
: ON
........... Sets the shutter speed/mode display to ON or OFF.
TAPE
: ON
........... Sets the tape remaining display to ON or OFF.
AUDIO
: ON
........... Sets the CH-1 audio level display to ON or OFF.
IRIS
: ON
........... Sets the iris value display to ON or OFF.
*** MASTER GAIN ***
Sets the gain corresponding to the LOW, MIDDLE, HIGH and TURBO positions of the
gain selector switch.
LOW
: 0 dB
Selects a GAIN value from -3, 0, 3, 6, 9, 12, 18, 24, 30, 36, or 42 dB .
MID
: 9 dB
Selects a TURBO value from -3, 0, 3, 6, 9, 12, 18, 24, 30, 36, or 42 dB.
HIGH
: 18 dB
n
TURBO
: 36 dB
When the gain selection value is changed, the BLACK SET adjustment
(Section 8-13) is required.
*** SHOT ID ***
Sets the shot ID of a maximum of twelve characters using alphanumeric character,
symbol, and space.
ID-1
:
ID-2
:
ID-3
:
ID-4
:
*
1 :
The box cursor is not functioned in the following conditions (DNW-9WS/9WSP/90WS/90WSP only).
1. Set the “BOX/4:3 LIMITS” to 4:3 at WIDE SCREEN page.
2. Set the “BOX/4:3 LIMITS” to 4:3, and “VF ASPECT” to 16:9A or 16:9B at WIDE SCREEN page.
3-1. Setup Menu
