Sonic KCS-5200, Operation Manual

Page: 75 / 153

6-25
6. 8. 2. Display Area Change
The display area in the bearing direction can be changed between 360° and 180°.
When 360° is set, the display area on the orthogonal screen is 180° from right to left with
the center on the bow bearing. When 180° is set, the display area on the orthogonal
screen is 90° from right to left with the center on the bow bearing.
< Operation procedure >
（
1
）
Press the menu key to open the menu.
（
2
）
Place the cross cursor over “Screen/Sub Screen” and press the menu key
to open “Screen/Sub Screen” menu.
（
3
）
Place the cr
oss cursor over “Orthogonal” and press the menu key
to
open the “Orthogonal” menu.
（
4
）
Place the cross cursor over “Display Area” and press the menu key
to
open “Display Area” menu.
（
5
）
Place the cross cursor over the display area item to be used, and press the
menu key to change the drawing area.
Menu
Screen/Sub Screen Orthogonal
Display Area