Sonic KCS-5200, Operation Manual

Page: 49 / 153

5-15
5. 4. 21. Tilt Mode
This function is used to select the tilt mode. When the Auto is selected, automatic tilt can
be repeated with the mode selected by Auto Tilt. When the One is selected, the
operation selected by Auto Tilt can be performed only once. When Tilt Track is selected,
Event 1 can be tracked and the tilt is changed according to the tracking.
5. 4. 22. Auto Tilt
This function is used to set the tilt change amount of the Auto Tilt mode.
5. 4. 23. Audio Volume
This function is used to adjust the audio volume. No audio sound is produced when the
setting is “0”. The audio volume is the maximum level when the setting is “10”.
5. 4. 24. Panel Brightness
This function is used to adjust the brightness of the backlight (green LED) of the
controller. The brightness is lowest when the brightness setting is 1, and the highest
when it is 10. This function makes no change in the sonar images or in the display mode.
5. 4. 25. Key Brightness
This function is used to adjust the brightness of the red LED over the key of the controller.
The brightness is lowest when the setting is 1, and the highest when the setting is 10.
This function makes no change in the sonar images or in the display modes.