Sonel PAT-80, User Manual

Page: 35 / 100

PAT-80
● PAT-85 ● PAT-86 – USER MANUAL
33
4 Measurements
NOTE!
The socket marked with symbol is connected with the PE pin of the test socket. It
is not allowed to apply dangerous voltage to this socket.

Tested appliance must be turned on.

Continuous measurement lasts until STOP is pressed.

After completing each measurement its parameters, date and duration of the meas-
urement can be viewed.
4.1 Visual check (preliminary test)
Select Visual check .
Examine the power cord and
the mains plug for cracks and
overheated spots.
The icon will take you to
the menu where you can add
and remove photos from the
inspection. Adding photos is
done using the
Sonel PAT
Analysis Mobile application
and the phone
’s camera.
If everything is in order:

select All OK or

tick Visual test is posi-
tive and go further using
icon .