PAT-80
● PAT-85 ● PAT-86 – USER MANUAL
69
After visual test, check (or not)
the corresponding boxes on the
left side of the screen.
If you touch the
Additional re-
quirements
box, you can add a
note from the test.
Activate (or not) the
Multibox
function.
Then select the
icon.
Alternatively, if everything is cor-
rect and you do not want to enter
comments, or have already en-
tered them, select
ALL OK
.
The test can be finished before the defined test time duration by pressing
STOP
button.
When the result of a single test of the sequence is negative, the tester stops the
sequence and does not proceed with the remaining tests. The failed test can be re-
peated (e.g. to verify whether the negative result was due to a connection error) by
pressing
START
button again. In order to complete the test sequence and save the
negative result into memory, press
to go to the end of the procedure.
In the right side of the screen icons
and
are displayed. They are active only
if you run a test for a specific appliance:
by scanning a
QR code
placed on it,
from menu
Browse memory > Client > Object > Appliance
using icon
.
change the object the appliance is installed in.
edit
information
of
the
appliance
that
has
been
examined
(see
sec. 3.3.16c
step
).
Summary of Contents for PAT-80
