animeo KNX 4 AC MoCo · REF. 5071074 -
25/47
6.4 Menu index card
"
Push button binary input 1 ... 4"
General information for push button binary input
Four different basis functions can be selected for each push button input:
Venetian blind UP/ DOWN
Switch dry contact
8-Bit value (rising edge)
Dimming
The single functions and parameters will be explained which arise depending on the selection of the basis function. For this, another basis
function has been selected for each push button. The functions are described with the help of the input 1 contact A/B and are identical for
the inputs 2-4, contacts C/D, E/F and G/H.
For the basis function "Venetian blind UP / DOWN" attention must be paid to which contact "UP" or "DOWN" is switched. The same ap-
plies with selection basis function "Dimming", for "Brighter" or "Darker" dimming. The pre-setting of the basis function for the menu index
card push button 1 ... 4 is Venetian blind UP / DOWN.
Basic function
Selection options:
Venetian blinds UP / DOWN
Switch dry contact
8-Bit value (rising edge)
Dimming
After long pressing of push button
Selection options:
0.5 seconds
0.3 - 5.0 seconds
This parameter defines the activity time of the corresponding push button which distinguishes between the sending of a short-term
telegram (step/stop) and a long-term telegram (UP / DOWN). If the time, for example, is set on 0.5 seconds, a long-term telegram is gener-
ated first with a longer pressing of the push button which is longer than 0.5 seconds. With a shorter activation which is smaller than 0.5
seconds, a short-term telegram is generated.
"Push button binary input 1 ... 4"
