SOMFY animeo DRM, Instructions Manual

Page: 13 / 47

animeo KNX 4 AC MoCo · REF. 5071074 -
13/47
No. Object name Model DPT_ID Description
71 Switch input 1: STEP/STOP 1 Bit 1.001 A short pressing of the button on input A generates a telegram on
this communication object with the value "0". The slat turns UP.
When the Venetian blinds are making a move then a short pressing
of the button generates a stop command on input A. A short press-
ing of the switch on input B generates a telegram with the value
"1". The slats turn CLOSE. When the Venetian blind is making a
move then a short pressing of the button generates a stop command
on input B.
72 Switch input 1: A, Switch 1 Bit 1.001 According to the parameter settings and the state at input 1 contact
A a switching telegram is sent over this communication object with
the value "1" or "0".
73 Switch input 1: B, Switch 1 Bit 1.001 According to the parameter settings and the state at input 1 contact
B, a switching telegram is sent over this communication object with
the value "1" or "0".
74 Switch input 1: A, 8-Bit value 1 Byte 5.004 According to the parameter settings, with a rising edge on input 1
contact A, the parametered value (0-255) is sent.
75 Switch input 1: B, 8-Bit value 1 Byte 5.004 According to the parameter settings, with a rising edge on input 1
contact B, the parametered value (0-255) is sent.
76 Switch input 1: A/B, Dimming 1 Bit 1.001 On/Off:
According to the parameter settings, with a short pressing at the
input 1 contact A/B, a telegram is generated with the value "1" or
"0".
Toggle/Toggle:
According to the parameter settings, with a short pressing at the
input 1 contact A/B, a telegram is generated with the value "1" or
"0".
77 Switch input 1:
A/B, Dimming, Value 4 Bit 3.007
Brighter/darker dimming:
According to the parameter settings, brighter dimming is done with
a long pressing at the input 1 contact A. According to the parameter
settings, darker dimming is done with a long pressing at the input 1
contact B.
Brighter/Darker toggle:
According to the parameter settings, over input 1 contact A, 100 %
is dimmed with longer pressing of the switch. When releasing the
corresponding switch at the input A, a stop command is generated.
The last activated dimming step becomes inverted. According to
the parameter settings, over input 1 contact A, 100 % is dimmed
with longer pressing of the switch. When releasing the correspond-
ing switch at the input B, a stop command is generated. The last
activated dimming step becomes inverted.
78 Switch input 2: UP/DOWN 1 Bit 1.001 See object description 70, C/D instead A/B
79 Switch input 2: STEP/STOP 1 Bit 1.001 See object description 71, C/D instead A/B
80 Switch input 2: C, Switch 1 Bit 1.001 See object description 72, C instead A
81 Switch input 2: D, Switch 1 Bit 1.001 See object description 73, D instead B
82 Switch input 2: C, 8-Bit value 1 Bit 5.004 See object description 74, C instead A
83 Switch input 2: D, 8-Bit value 1 Bit 5.004 See object description 75, D instead B
84 Switch input 2: C/D, Dimming 1 Bit 1.001 See object description 76, C/D instead A/B
85 Switch input 2: C/D, Dimming, Value 4 Bit 3.007 See object description 77, C/D instead A/B
86 Switch input 3: UP/DOWN 1 Bit 1.001 See object description 70, E/F instead A/B
87 Switch input 3: STEP/STOP 1 Bit 1.001 See object description 71, E/F instead A/B
88 Switch input 3: E, Switch 1 Bit 1.001 See object description 72, E instead A
89 Switch input 3: F, Switch 1 Bit 1.001 See object description 73, F instead B
90 Switch input 3: E, 8-Bit value 1 Bit 5.004 See object description 74, E instead A