Solwise Elite VoIP Gateway User’s Guide
90
5.12.2.1 set coding
profile_id
adaptive_playout
The ITG has a built-in voice packet buffer, which allows the ITG to remove the
packet jitter from the incoming packet stream. The ITG also implements an adaptive
voice packet playback
algorithm, which automatically adjust the time each voice packet is buffered in the
voice packet buffer before being played out. This command is used to enable/disable
the adaptive playback function for a voice coding profile.
set coding profile_id adaptive_playout {on | off}
Syntax description
on
Enable adaptive
playback.
off
Disable adaptive
playback.
Related Commands
set coding
profile_id
max_delay
set coding
profile_id
min_delay
set coding
profile_id
nom_delay
5.12.2.2 set coding
profile_id
dtmf_relay
The ITG supports DTMF Relay, in which DTMF tones are detected during voice
processing, encoded into H323-UserInformation packets and conveyed to the remote
ITG via the H.323 call control band. This command is used to enable or disable the
DTMF Relay feature.
set coding profile_id dtmf_relay {on | off}
Syntax description
on
Detect DTMF tones while voice session is on-
going, and send detected DTMF digits to
remote gateway via the H.323 call control
band.
off
Do not detect DTMF tones. DTMF tones are
compressed and send to remote gateway the
same as regular voice frame.
5.12.2.3 set coding
profile_id
max_delay
The ITG has a built-in voice packet buffer, which stores voice packets received from
the network. Voice packets from network may have traversed variable path and each
packets have experienced different propagation delay. The effect of non-uniform
