Solwise Elite VoIP Gateway User’s Guide
45
em clear_conf_wait_max
Sets the maximum duration to wait for an on-
hook response on the M-lead after going on-
hook on the E-lead
em clear_detect
Specifies the period of time M-lead needs to
be on-hook before call clearing is declared
em connected_min
Specifies the minimum period of time that a
connection will be maintained
em dial_tone
Specifies if dial tone should be generated on
incoming calls
em disable_hangup
Specifies the time period a port will wait after
hanging up a call before signaling that it is in
a disabled state
em guard_all
Sets the period after an aborted call when no
incoming/outgoing calls will be
accepted/initiated
em guard_out
Sets an additional period of time after
guard_all
when incoming calls will be
accepted.
em offhook_db
Sets the off-hook debounce interval
em onhook_db
Sets the on-hook debounce interval
em size_detect
Specifies the period of time the M-lead needs
to be off-hook before an incoming call is
declared
emd in_delay_max
Sets the maximum duration of the delay signal
response to the Seize Detect on the M-lead
emd in_delay_min
Sets the minimum duration of the delay signal
response to the seize detect on the M-lead
emd in_digit_ign
Sets the period of time, after completing the
delay signal, before the digits will be accepted
on incoming calls
emd out_delay_check
Sets the period of time after going off-hook on
the E-lead before checking the M-lead for the
delay signal response
emd out_delay_dur_max
Set the maximum duration of the delay signal
response on the M-lead for it to be detected on
outgoing calls
emd out_delay_dur_min
Sets the minimum duration of the delay signal
response on the M-lead for it to be detected on
outgoing calls
emd out_intg_check
Sets the Integrity Check mode.
emi glare_report
Sets a time period during which, if glare is
detected, the interface will stay off-hook and
generate congestion tone
emi wait_dsp_ready
Sets a time period to wait for the DSP
software to be ready before digit collection
can be enabled
emw in_wink_digit_ignore
Specifies the period of time that will be
ignored after completing the wink and before
