manualshive.com logo in svg

Solwise Elite ITG, Extera Set-Up Instructions

Share
Download
Solwise Elite ITG Extera Set-Up Instructions Download Page 60

 

Solwise Elite VoIP Gateway User’s Guide 

60 

O 

 

Call ID is number is not available 

 

 

Default 

 

No caller ID number 

 

Related Commands 

 

set port 

port 

enable_user_cid 

 

set port 

port 

fxo_caller_id 

 

set port 

port 

fxs caller_id 

 

5.5.5 set 

port 

port 

copyof  

This command is used to copy the settings of a telephony port to another telephony 
port. 

 

set port port copyof src_port 

 

Syntax description 

 

src_port 

 

ID of the telephony port which the 
settings will be copied from. 

 

 

5.5.6 set 

port 

port 

cp_tone_det_cfg  

The gateway implements two call progress tone detection configurations, default and 
alternate, and allows users to specify which configuration will be used for call 
progress tone detection. A configuration includes filter information, and a table 
containing cadence information of all the call progress tones that are to be detected. 
The default configuration allows for the detection of the following tones 

 

  

busy 

 

  

ringback 

 

  

congestion 

 

  

disconnect 

 

  

disc1 

 

  

disc2 

 

  

disc3 

 

  

disc4 

 

  

disc5 

 

The alternate configuration allows for the detection of the following tones 

 

  

busy 

 

  

ringback 

 

Summary of Contents for Elite ITG





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands