manualshive.com logo in svg

Solwise Elite ITG, Extera Set-Up Instructions

Share
Download
Solwise Elite ITG Extera Set-Up Instructions Download Page 124

 

Solwise Elite VoIP Gateway User’s Guide 

124 

atpm hlist 

 

5.17.3.3  atpm hfind  

This command finds and displays an entry in the hunt group table. 

 

atpm hfind id 

 

Syntax description 

 

id 

 

ID of the hunt group to be 
displayed. 

 

 

Allowed only in database update mode 

 

No 

 

Related Commands 

 

atpm hadd 

 

atpm hdel 

 

5.17.3.4  atpm hlist  

This command displays all entries in the hunt group table. 

 

atpm hlist 

 

Syntax description 

 

This command has no arguments or keywords 

 

Allowed only in database update mode 

 

No 

 

Related Commands 

 

atpm hadd 

 

atpm hdel 

 

5.17.4  Address Table Management Commands  

5.17.4.1  atpm aadd  

Use the 

atpm aadd 

command to add an entry into the ATPM address table. 

 

atpm aadd tel# min_digits max_digits hunt_group_id 
prefix_strip_len [prefix#] 

 

Syntax description 

 

tel# 

 

Telephone number to match. This is only part of 
the total dialed string. 

 

Summary of Contents for Elite ITG





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands