Solwise Elite VoIP Gateway User’s Guide
111
set h323 term_id alias
Syntax Description
term_id
Default
Null
5.14.27 set h323 time_to_live
set h323 term_id milliseconds
Syntax Description
milliseconds
Default
0
5.15 Configuration Management Command
The CLI maintains three areas where the parameters for telephony interface ports,
voice and fax coders, and H.323 configuration are stored:
Temporary
Active
Non-volatile Storage (NVS)
When a
set
command is entered and processed, it changes the parameter value in
the Temporary area. This does not affect current operation of the ITG, which is using
the values in the Active area. The
config activate
command moves
configuration data from the Temporary area to the Active area, where it can actually
be used. Thus a user can make multiple changes in the Temporary area using
set
commands, then put them into use with a single
config activate
command.
(Note that the
config activate
command may only be used between calls,
and will usually tear down any in-progress calls when invoked.)
Configuration data in the Active area is only available while the ITG remains in
operation. If the ITG is reset, the Active area is reloaded from the data stored in
NVS. Data in the Active area may be saved to NVS by entering the
config
store
command.
For most of the H.323 parameter, settings won’t take effect until the ITG reset. To
ensure the H.323 setting to take effect, it is recommended to reset the ITG after
changing the settings using the
set h323
command.
In summary:
