Solwise Elite VoIP Gateway User’s Guide
109
Syntax Description
on
Accept incoming calls with H323
Faststart mode
off
Do not accept incoming calls with Set
H323 Faststart mode
Default
off
Related Command
set h323 out_fast_start
5.14.22 set h323 master_delay
To be able to interoperate with certain H.323 terminals, such as Microsoft
NetMeeting, the gateway can not send out H.323 open logical channel message to its
counter H.323 terminal immediately after completing H.323 maser slave
determination phase. This command allows users to delay sending the H.323 Open
Logical Channel message to its counter H.323 terminal.
set h323 master_delay {on | off}
Syntax Description
on
Delays sending H.323 open logical channel
message.
off
Sends H.323 open logical channel message
upon completing H.323 maser slave
determination.
Default
off
5.14.23 set h323 nat_call
When the ITG is installed in a network that connects to WAN via a router with
Network Address Translation (NAT) feature, the NAT might block calls. This
command is used to enable the ITG to connect to remote gateways connecting to
WAN via NAT capable router.
set h323 nat_call {on | off}
Syntax Description
on
Enable.
off
Disable.
