manualshive.com logo in svg

Solwise Elite ITG, Extera Set-Up Instructions

Share
Download
Solwise Elite ITG Extera Set-Up Instructions Download Page 129

Solwise Elite VoIP Gateway User’s Guide 

 

  

129

 

spy [key] [level] 

 

Syntax description 

 

key 

 

Spy key specifying which module of code to 
be tracked. 0 stands for all keys. 

 

level 

 

Filtering level 

 

 

If the command is entered without specifying the spy key and filtering level, spy 
keys supported by the ITG and the current filtering level for each key will be 
displayed. 

 

5.18.2  spy dump  

This command displays the content of the spy trace buffer. 

 

spy dump 

 

Syntax description 

 

This command has no arguments or keywords 

 

5.18.3  spy flush  

This command flushes the spy trace buffer. 

 

spy flush 

 

Syntax description 

 

This command has no arguments or keywords 

 

 

5.19  Software Upgrade Utility Commands  

The ITG offers two operation modes. Under normal conditions, the ITG operates in 
Gateway mode. When software upgrade is required, the ITG may be operated in 
Software Upgrade mode. Under Software Upgrade mode, the CLI supports limited 
commands allowing users to read new revision codes from a remote TFTP server 
and write it to the built-in flash non-volatile storage. This section describes CLI 
commands available when the ITG operates in software upgrade mode. 

 

5.19.1 help 

 

The 

help 

command lists the top-level commands. 

 

help 

 

Syntax Description 

 

This command has no arguments or keywords 

 

5.19.2 ping 

 

The 

ping 

command sends Internet Control Message Protocol (ICMP) echo request 

Summary of Contents for Elite ITG





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands