CIE-H14 User Manual Ver. 1.1
- 53 -
http://www.ezTCP.com
st net
“st net” command displays present network states of all sessions.
Figure 7-7 “st net” command
st sio
“st sio” command displays the number of bytes for the serial port.
Figure 7-8 “st sio” command
st uptime
“st uptime” command shows amount of time since CIE-H14 has booted up.
Figure 7-9 “st uptime” command
sc
“sc” command is used when users close a session. [OP1] means the name of session,
and [OP2] should be “CLOSE”.
Figure 7-10 “sc” command
Lower-case letters are only allowed to use “sc” command.
sd
“sd” command is for capturing serial data. [OP1] means name of the session, [OP2]
means period, which has a 10ms unit, for the capture.
Figure 7-11 “sd” command
