CIE-H14 User Manual Ver. 1.1
- 15 -
http://www.ezTCP.com
Telnet COM Port Control Option
CIE-H14 has Telnet COM Port Control Option function that is specified by RFC2217. It
plays a role of an access server. If the Telnet COM Port Control Option is enabled,
CIE-H14 sends the CTS, DSR control signal to the communication counterpart, and
sets its serial port items (RTS, DTR, Baud rate, data bits, parity, stop bit) after getting
information from the communication counterpart.
1.6.5
Ethernet Interface
An RJ45 connector is for the network interface of CIE-H14. You can use a UTP cable. It
automatically senses 10Mbits or 100Mbits Ethernet. It also provides auto MDI/MDIX
function that can automatically sense a 1:1 cable or cross over cable.
Each Ethernet device has its own hardware address (MAC address). CIE-H14 is shipped to
the market with the hardware address set in the factory.
Figure 1-11 the RJ45 connector
