CIE-H14 User Manual Ver. 1.1
- 41 -
http://www.ezTCP.com
6.3
AT Command
AT command is a mode which users control CIE-H14 with AT command like controlling
modem. In this mode, active and passive TCP connections are available. And users are
allowed to configure some environmental parameters with extended commands.
6.3.1
Key parameters
The configuration should be implemented via the serial port of CIE-H14
Commands
Description
Examples
+plip
Local IP Address
at+plip=10.1.0.1<CR>
+plp
Local Port
at+plp=1470<CR>
+prip
Peer IP Address
at+prip=10.1.0.2<CR>
+prp
Peer Port
at+prp=1470<CR>
+pdc
DHCP
at+pdc=1<CR> (On)
+pto
Timeout
at+pto=10<CR>
+pwp
Store setting
at+pwp<CR>
Table 6-7 some of extended commands for configuration
Related items with the IP Address and Local Port
As well as the local port, the IP address related parameters such as IP Address,
Subnet Mask and Gateway IP Address can be set.
Peer Address / Peer Port
IP address and local port of a remote host are can be set.
Type of assigning the IP address: Manual, DHCP, PPPoE
Not only manual setting, also automatic assigning protocol (DHCP, PPPoE) is available.
The others
Some of options including [Timeout] can be configured in this mode.
