CIE-H14 User Manual Ver. 1.1
- 46 -
http://www.ezTCP.com
Dynamic Update of Peer host
This is a function that CIE-H14 automatically sets its peer host with information of the
last packet which is received from network. In the packet, the source address and
port number are used.
Parameter
Value
Peer Address
0 (None)
Peer Port
0
Table 6-11 setting for [dynamic update of peer host] function
Figure 6-7 Time chart for [dynamic update of peer host]
Point
State
~
Sending any UDP data to the network is impossible.
①
UDP data arrives from Remote Host 2.
~
Send UDP data to Remote Host 2.
②
UDP data arrives from Remote Host 1.
~
Send UDP data to Remote Host 1.
③
UDP data arrives from Remote Host 2.
~
Send UDP data to Remote Host 2.
Table 6-12 descriptions of each state
“ABC”, “DE”, and “FGH” in the above figure are the data that CIE-H14 receives from a
serial port and send to the network.
