CIE-H14 User Manual Ver. 1.1
- 24 -
http://www.ezTCP.com
3.1.2
Configuration via Serial
Checklists
Make sure of the connection between your PC and CIE-H14 using a RS232 cross
cable. CIE-H14 has to be operating in the [Serial Configuration] mode. You make CIE-
H14 operate in the serial configuration mode by pressing the ISP- button less than 1
second. After then, read the setting on the [Serial] tab.
Procedures
Figure 3-3 procedures for configuration via serial port
Step 2, Reading
Figure 3-4 reading procedure via serial
① Choose the [Serial] tab.
② Select the COM port which is the device is connected.
③ Open the COM port pressing the [Open] button.
④ Load the setting with the [Read] button.
Refer to the document [ezManager Users’ Manual] on our website for details.
