CIE-H14 User Manual Ver. 1.1
- 17 -
http://www.ezTCP.com
1.6.7
ISP Switch
There is an ISP switch located on the back of the product. It is a switch allowing CIE-H14
to operate in the serial configuration mode or ISP mode. If you press it between 20ms and
1s, CIE-H14 will go into the serial configuration mode that you can configure the
environment parameters through the RS232 port. If you press it over a second or supply
power while pressing it, CIE-H14 will be operated as the ISP mode. In this mode, you can
download the firmware file or HTML files.
Figure 1-12 ISP switch
In the ISP and serial configuration mode, you are allowed to reset a password or cancel
access restriction. Use these modes when you are faced with the problems.
