CIE-H14 User Manual Ver. 1.1
- 43 -
http://www.ezTCP.com
TCP Client – setting parameters and an active connection
Figure 6-5 an active TCP connection
Point
State
~
Set parameters in the AT command mode
①
CIE-H14 sends a request segment of a TCP connection with
the ATD command.
~
Processes of the TCP connection
②
The TCP connection has been established.
~
CIE-H14 sends “CONNECT” message to the serial port.
Table 6-9 descriptions of each state
Refer to the [ATC mode] document on our web site for details.
