Softing FG-200 HSE/FF, User Manual

Page: 8 / 82

FG-200 HSE/FF Modbus - User Manual
8
Version EN-112021-1.30.3
1.4 Document history
Document version Changes since last version
1.00 First version
1.01
§
Installation in hazardous locations :
- Introduction restructured and subsections implemented.
- Preliminary information restrictions in hazardous locations deleted.
- Certificate for cULus
added .
§
New section with certificate copy of UL certificate UL Certificate of
Compliance .
1.02 New Corporate Identity implemented.
1.20 References to FF-CONF replaced with comConf. Instructions to Modbus mapping
and related chapters removed.
1.30 New layout and structure of chapters. Simplified mounting, dismounting and
configuration instructions. Additional trademark references.
Software installation procedure updated.
1.30.1
New image of power supply pin assignment . Minor editorial changes.
1.30.2
RJ45 status LEDs explained.
1.30.3
Description of Modus functionality updated. Conformity of EX standards
updated.
1.5 Related documentation
The following documents provide additional product information:
§
Communication Configuration Tool - User Guide
§
FG-200 HSE/FF Modbus - Datasheet
1.6 Document feedback
We would like to encourage you to provide feedback and comments to help us improve the
documentation. You can write your comments and suggestions to the PDF file using the editing tool in
Adobe Reader and email your feedback to support.automation@softing.com .
If you prefer to write your feedback directly as an email, please include the following information with
your comments:
§
document name
§
document version (as shown on cover page)
§
page number
11
14
79
16
57
19 13