Softing FG-200 HSE/FF, User Manual

Page: 74 / 82

FG-200 HSE/FF Modbus - User Manual
74
Version EN-112021-1.30.3
9.4 Coding of bit fields
Parameter BLOCK_ERR
No error 0x0000
Out Of Service 0x0001
Power up 0x0002
Device needs maintenance 0x0004
Readback check failed 0x0008
Lost nv data 0x0010
Lost static data 0x0020
Memory failure 0x0040
Output failure 0x0080
Input failure 0x0100
Dev needs maint soon 0x0200
Dev fault state set 0x0400
Local override 0x0800
Simulate active 0x1000
Link config err 0x2000
Block config err 0x4000
Other 0x8000
Parameter MODE_BLK:
Out Of Service 0x01
Initialization Manual 0x02
Local Override 0x04
Manual 0x08
Auto 0x10
Cascade 0x20
Remote-Cascade 0x40
Remote-Output 0x80
Modbus Register 16 Bit register contains target mode in High Byte, actual mode in low byte.
Example: Modbus value 0x1001 means: target mode = Auto, actual mode = Out Of Service
Field Diagnostics (Parameter FD_FAIL, FD_OFFSPEC, FD_CHECK, FD_MAINT)
The bit fields are vendor specific and not specified by FIELDBUS Foundation except the least significant bit
(LSB). The LSB indicates the check function to be active. The check function is typically mapped to the
FD_CHECK parameter but may also be mapped to any of the other FD_xxx parameters.
The value for LSB is 0x80000000, the value for the most significant bit (MSB) is 0x00000001.