Softing FG-200 HSE/FF, User Manual

Page: 71 / 82

Chapter 9 - Appendix
Version EN-112021-1.30.3
71
9.3.3 FPGA Error Statistics submenu
This table shows the values of the framing error counters per channel and checksum errors in received
packets. High counter values may indicate a bad signal quality in the H1 channel and/or a device that is not
operating properly.
In addition, the following information is displayed:
§
Framing Errors (i.e. incomplete frames, might be an indication of noise on the H1 segment)
§
Checksum Errors (might be an indication of noise on the H1 segment)
§
Carrier Not Seen Errors
§
Buffer Not Empty (might indicate that the H1 network is not connected or not powered)
§
Receive Overrun
§
Transmit Overrun
§
Transmit Readback Error
§
Collision Timeout Errors (might indicate that the H1 network is not connected or not powered).