Softing FG-200 HSE/FF, User Manual

Page: 45 / 82

Chapter 6 - Using the web interface
Version EN-112021-1.30.3
45
Name contains the parameter name. You can enter any name such as a
plant or system tag name for an I/O parameter. Maximum length
is 32 characters.
Description contains the user description of the parameter name.
[Save Changes] saves your changes. To display the new or modified values click
[Switch to PP Overview]
.
[Switch to PP Overview]
switches back to the main point pages overview window.
6.5.3.2 Point Columns
The point columns submenu opens a table allowing you to activate various point columns to build the
specific point page format. Activate the required column to make it appear in the point page:
Any deselected point column is disabled and does not appear in the point page (refer also to Point
Pages in the
Monitor
menu).
6.5.3.3 Homepage
The homepage submenu opens a table allowing you to set the start page of the FG-200 HSE/FF Modbus
web interface to one of the following four pages:
§
Information - Contact
§
Diagnostics - Fieldbus
§
Monitor - Point Monitor
§
Monitor - Point Pages
Select the desired homepage and confirm your selection with [Set Homepage] . The next time you log in
into your web interface it is opened with the new start page.
35