SOFAR 3.3K~12KTL-X
User manual
All rights reserved
©
Shenzhen SOFARSOLAR Co ., Ltd.
- 41 -
2. Clear Energy
15. Set Reactive
3. Clear Events
16. Set PowerDerat
4. Set Country Code
17. PE Line Control
5. On-Off Control
18. Set RefluxP
6. Enset Country Code
19.MPPT Scan
7. Set Energy
20.Set ElecMeter
8. Set Address
21.Setting P(f)
9. Set Inputmode
22.Setting Q(v)
10. Set Language
23.Control 81.S1
11. Set StartPara
24.AutoTest Fast
12. Set SafetyVolt
25.AutoTest STD
13. Set SafetyFreq
26.Logic interface
The parameters and serial numbers vary from country to country
Set Time
Set the system time for the inverter.
Users press “Back” button to enter “1.Enter Setting” interface, Press “OK”
button to enter main setting interface. Enter “1. Set Time” by pressing“Up”
button or “Down” button, then press”OK“button and start to set up time.
Time set from year, month, day, minutes, and seconds in turns, “Up” button
or “Down”button to choose different value to set each date. Set each value
is need to press “OK” button to confirm setting. “success” is displayed if
the setting time is correct, “fail” means failure settings.
Clear Energy
Clean the inverter of the total power generation.
Users press"Back"button to enter"1.Enter Setting"interface,
Press"OK"button to enter main setting interface. Then Enter"2.Clear
Energy"by pressing"Up"button or"Down" button, press"OK"button and
start to clear produce."success"is displayed after settings.
Clear Events
Clean up the historical events recorded in the inverter.
