SOFAR 3.3K~12KTL-X
User manual
All rights reserved
©
Shenzhen SOFARSOLAR Co ., Ltd.
- 31 -
Note L2 is 2 to 3 mm longer than L1.
Step 3
Insert the positive and negative power cables into corresponding
cable glands.
Step 4
Insert the stripped positive and negative power cables into the
positive and negative metal terminals respectively and crimp them using a
clamping tool. Ensure that the cables arecrimped until they cannot be
pulled out by force less than 400 N, as shown in Figure 4-16.
Figure 4-17 Connecting DC input power cables
1. Positive power cable
2. Negative power cable
Step 5
Insert crimped power cables into corresponding housings until you
hear a "click" sound. The power cables snap into place.
Step 6
Reinstall cable glands on positive and negative connectors and
rotate them against the insulation covers.
Step 7
Insert the positive and negative connectors into corresponding DC
input terminals of the SOFAR 3.3K~12KTL-X until you hear a "click"
sound, as shown in Figure 4-17.
Figure 4-18 Connecting DC input power cables
1. Bayonet
Follow-up Procedure
To remove the positive and negative connectors from the SOFAR
3.3K~12KTL-X, insert a removal wrench into the bayonet and press the
