Safety Notes
Page 4
Operating instructions
4.2 Common Cautions for Safety
The MAGLUMI
®
Diagnostic System is to be used only by
Professional Users.
Operate the Instrument following the indications and procedures
described in Operating Instructions for the MAGLUMI
®
Analyzer.
Follow all warnings, cautions, and notes indicated on the
MAGLUMI
®
Analyzer and in the operating Instructions. If not,
human injuries or damage to Instrument can be caused.
Caution on Safety is displayed by "Caution" or alert symbol
as
follows.
The barcode reader is a laser beam. Never look directly into
thebarcode reader, as this can damage the eyes!
Before using the Reagent Integrals, read the IFU
(instructionsfor use) provided in the reagent package
(storage, preparation)!
NOTE
The barcode reader is a laser beam. Never look directly into
thebarcode reader, as this can damage the eyes!
CAUTION
The barcode reader is a laser beam. Never look directly into
thebarcode reader, as this can damage the eyes!
When using reagents or chemicals, ventilate the room well on your
own responsibility. If not, trouble on health can be caused.
For keeping safety, do not modify the MAGLUMI
®
Diagnostic
System, do not change the components or accessories, do not use
parts either than the specified, and do not remove the safety device.
Installation at the delivery is performed by Service Engineers of
SNIBE or Technicians certified by SNIBE, or performed under the
supervision of them to offer a safe and precise Analyzer.
Do not perform operation and function not described in the Operating
Instructions. If trouble occurs on the Diagnostic System, contact
SNIBE, or Sales Agent.
Cautions indicated on the MAGLUMI
®
Diagnostic System, in
Operating Instructions are prepared after careful examination,
however, phenomenon beyond prediction can occur. When
performing operation and maintenance, not only follow the
instructions, but also pay attention always by yourself.