manualshive.com logo in svg

Snibe Maglumi 2000, Operating Instructions Manual, Page: 4 / 82

Share
Download
Snibe Maglumi 2000 Operating Instructions Manual Download Page 4

 

Safety Notes

 

 

1 Caution on Electromagnetic Wave Interference 

 

1.1 Electromagnetic Wave Interference given by MAGLUMI

®

 to other Equipment 

 

The use of the MAGLUMI

®

 

Analyzer may interfere with radio 

and television reception. 

 

Use the cables attached at the installation for connection between 
the devices in the system. The proper use of the specified cables 
minimizes Electromagnetic Wave Interference. 

 

Installation and service of the system or changes in the 
installation may never be performed by persons not authorized by 
SNIBE, especially never connect devices in the system with 
movable multiple plug sockets. 

 

However, there is no guarantee that the MAGLUMI

®

 

Analyzer will 

not cause Electromagnetic Wave Interference. 

 

a.  When the MAGLUMI

®

  

Analyzer may be the cause, turn off the 

power of this Instrument and check radio and television reception. 

 

b.  If it is improved, the MAGLUMI

®

 Analyzer probably is the cause. 

 

1.2 Electromagnetic Wave Interference that may be given to the MAGLUMI

®

 Analyzer 

 

If the MAGLUMI

®

 

Analyzer is used near equipment that generates 

strong electric and magnetic field, noises may enter the Instrument 
to affect the performances and functions. 

 

Use the cables attached at the installation for connection between 
the devices in the system. The proper use of the specified cables 
minimizes electromagnetic wave interference. 

 

Installation and service of the system or changes in the 
installation may never be performed by persons not authorized by 
SNIBE, especially never connect devices in the system with 
movable multiple plug sockets. 

 

However, there is no guarantee that the MAGLUMI

®

 

Analyzer will 

not be affected by Electromagnetic Wave Interference. 

 

When some equipment may be the cause, turn off the power of 
the equipment and check the functions of the MAGLUMI

®

 

Analyzer.If they are improved, Interference from the equipment is 
probably the cause. 

 

Try the following to correct. 

 

a.  Move the MAGLUMI

®

  

Analyzer further away from the 

equipment that may be the cause. 

b.  Connect the power cord of the MAGLUMI

®

  

Analyzer to an 

outlet that is on a different circuit from the equipment that 
may be the cause. 

 

c.  Check that the other equipment, which is connected with this 

Analyzer, is not affected by Electromagnetic Wave Interference. 

Page 2 

Operating instructions 

Summary of Contents for Maglumi 2000



















































































Reviews:

No comments