78315-01NM Single Channel Interface
(Loop Powered)
(Not available at time of issue)
Where appropriate refer to the as fitted wiring drawings (if supplied), notes to
installer, EMC compliance, LVD compliance, cable types and loop circuit connections.
a)
Identify the SINGLE CHANNEL INTERFACE (LOOP POWERED)
package numbered 78315-01NM.
b)
Remove the lid to the module.
c)
Remove all packages from inside the module.
d)
Knockout the required cable entry points from the module sides.
e)
Mark the four fixing positions on the wall to which the unit is to be
mounted.
Figure 18-1 Single Channei Interface (lid removed)
fl346
78315-01NM Single Channel Interface (Loop Powered)
78910-03NM Issue 2_10/96
18-1
Senator II Installation Manual