Figure 8-1 Fitting a sensor head to terminal plate . . . 8-2
Figure 8-2 Removal of the chamber module . . . . . . 8-3
Figure 8-3 Removal of electronics from terminal plate
8-4
Figure 8-4 Fitting together chamber and electronics . 8-5
Figure 9-1 Cutouts for lugs . . . . . . . . . . . . . . . 9-1
Figure 9-2 Flush kit installation . . . . . . . . . . . . . 9-2
Figure 10-1 T-breaker and slave units . . . . . . . . . 10-1
Figure 10-2 Fitting a t-breaker or slave unit . . . . . . 10-2
Figure 11-1 Duct Sensor fixing and connections . . . . 11-2
Figure 12-1 Manual Call Point parts . . . . . . . . . . 12-2
Figure 13-1 Alarm Sounder fixing and connections . . 13-1
Figure 14-1 Interface Unit with the door open . . . . . 14-1
Figure 14-2 Interface unit with the door open . . . . . 14-2
Figure 14-3 Connections Details . . . . . . . . . . . . . 14-3
Figure 15-1 Interface unit fixing and connections . . . 15-1
Figure 15-2 Line module internal connection details . 15-2
Figure 16-1 Supply Unit fixing details . . . . . . . . . 16-1
Figure 16-2 PSU to interface unit connections . . . . . 16-2
Figure 17-1 Loop powered zone module
with lid removed . . . . . . . . . . . . . . . . . . . . . 17-1
Figure 18-1 Single Channel Interface (lid removed) . . 18-1
Contents
Senator II Installation Manual
78910-03NM Issue 2_10/96