NOTE: Ensure the spacer/back box gasket is fitted on and around the
back box profile.
g)
Secure the spacer assembly to the back box using the 2 - long screws.
h)
Reassemble the cover assembly to the main assembly with the socket
head screw. To do this:
i)
Fit the spacer/cover gasket, if used.
ii)
Insert the glass in a sloping position.
iii)
Hang the test key in its operating position.
iv)
Place the cover/glass gasket, if used, over the glass
with its bevelled edge outwards.
fl76
Figure 12-1 Manual Call Point parts
Surface Fixing
Manual Call Points
Senator II Installation Manual
12-2
78910-03NM Issue 2_10/96