78260-01NM Semi flush mounting kit
Where appropriate refer to as fitted wiring diagrams (if supplied), general notes,
EMC compliance, cable types and loop circuit connections.
These procedures describe how to semi flush a Senator II fire sensor to a
ceiling tile. A 78200-01NM terminal plate and 78260-01NM semi flush
mounting kit are required.
a)
Identify the package 78260-01NM SENSOR FLUSH MOUNTING
KIT and check the contents:
Component
Quantity
Semi flush housing
1
Flush ring
1
Clamp
2
Clamping ring
1
Locking screws
2
b)
Remove the ceiling tile to which the semi flush mounting kit is to be
fitted.
c)
Cut a hole 93mm diameter in the tile to allow for the lugs on the semi
flush housing.
d)
Assemble the semi flush housing to the tile using the clamp ring,
clamps and locking screws.
fl115
Figure 9-1 Cutouts for lugs
78260-01NM Semi flush mounting kit
78910-03NM Issue 2_10/96
9-1
Senator II Installation Manual