78345-06NM Power Supply Unit
Where appropriate, refer to the as fitted wiring diagrams (if supplied), plus sections of
this manual: general notes, EMC compliance, LVD compliance, cable types and loop
circuit connections.
Fuses and Locations
Fuse
Rating
Location
Mains
20mm x 5mm 1A HRC Mains terminal block
a)
Identify the package labelled SUPPLY UNIT numbered
78345-06NM.
b)
Using the key open the door and check its condition of the unit.
c)
Knockout the required cable entry points (6-off on top of case).
NOTE: The unit must be mounted with the cable entry points at the top
of the unit.
d)
Mark and drill the four fixing hole positions on the surface to which
the unit is to be mounted.
fl203
Figure 16-1
Supply Unit
fixing details
78345-06NM Power Supply Unit
Fuses and Locations
78910-03NM Issue 2_10/96
16-1
Senator II Installation Manual