Installing
the Security System
59
RB6741-Z Touchscreen Security System Installation Manual
5.
When all the sirens are found and paired, touch
Done
. Any located sirens that were not paired
are released by the Touchscreen. Sirens can
be added later (see page 111
).
The Wireless
Sirens Located screen notes the number of
wireless sirens found and paired.
6.
Touch
Next
. The Configure Wireless Sirens
screen is displayed showing icons representing
the sirens that were located and paired.
7.
Touch each siren icon to configure it. The
Settings screen is displayed.
8.
Enter a new label for the siren, if desired. Touch
Done
to save your changes. The
wireless sirens are marked as configured. From this point, you can configure any or all
of the following devices:
Takeover Boards
– see “Adding Takeover Boards to the Security System” on page
38.
Camera
– see “Adding Cameras to the Security System” on page 41.
Lights
– see “Adding Lighting Devices to the Security System” on page 48.
Thermostats
– see “Adding a Thermostat to the Security System” on page 50.
Key fobs
– see “Adding Key Fobs to the Security System” on page 52.
Key pads
– see “Adding Key Pads to the Security System” on page 54.
After all the devices are configured, or to configure the devices later, touch
Next
to go
to Testing the Alarm Functionality of the Security System.
