187
RB6741-Z Touchscreen Security System Installation Manual
Appendix E -
Using the Key Fob
A key fob is a wireless peripheral that lets you remotely perform certain Touchscreen
functions anywhere within RF range of the Touchscreen, including outside the premises.
Using a key fob, you can:
Check the current system status (armed, disarmed, or “not ready”)
Arm the system in Arm Away mode or Arm Stay mode (for an explanation about these
arming modes, refer to the
RB6741-Z Touchscreen Security System User Manual
)
Disarm the system before entering the premises
Send a silent Panic alarm for police assistance
Note:
When a key fob button is pressed, the LED flashes red once to indicate it has
contacted the Touchscreen. If the key fob is out of range of the Touchscreen, the LED flashes
red three times quickly.
Checking System Status
1. Press the
button for 1.5 seconds to light the LED to show the current status of the
security system.
2. The LED flashes red once to indicate that it has contacted the system, then:
Lights green for three seconds if the system is disarmed.
Lights red for three seconds if the system is armed.
Lights orange for three seconds if the system is not ready to be armed (for example, a
door is open).
